Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 50 lb Easy Open Can
 50 lb Easy Open Can Buy America
3/16 x 18 in (4.8 x 450 mm) ED032790
5/32 x 14 in (4.0 x 350 mm) ED032636
7/32 x 18 in (5.6 x 450 mm) ED034314

Excalibur® 7028

Stick (SMAW) | ED032790

CLASSIFICATIONS:
E7028 H8

Mild Steel, Low Hydrogen • AWS E7028 H8

Diameter

Select Diameter

  • 3/16 x 18 in (4.8 x 450 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Package

Select Package

  • 50 lb Easy Open Can
Buy Now

DETAILS

Mild steel low hydrogen stick electrode designed high deposition rate welds

Features

  • High deposition rates
  • Premium arc performance
  • High travel speed
  • Capable of producing weld deposits with impact toughness exceeding 84 J (60 ft•lbf) at -40°C (-40°F)

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

Stick Electrode 50 lb. Box

Jetweld® 1

ED010366
Stick Electrode 50 lb. Box

Jetweld® 1

ED010375
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7028

ED032636
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7028-H8
ABS ABS - Part 2 3YH10
CWB CSA W48 E4928-H8
DNV-GL DNV - 2.9 3YH10
LR LR - Chapter 11 3YM H10

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Hardness Rockwell B
E7028-H8 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (63-71) 530-580 (77-84) 28-32 104-422 (77-311) 85-90

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7028-H8 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.90 max. 0.08 max. 1.75 max. 8 max. 0.6 max.
Typical Result 0.04-0.08 0.03-0.07 1.11-1.50 0.03 max. 0.01-0.07 0.009-0.015 0.004-0.012 0.35-0.65 0.01-0.02 1.22-1.58 2-8 0.2 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
5/32 in (4.0 mm) DC+ 125-175
5/32 in (4.0 mm) AC 130-180
3/16 in (4.8 mm) DC+ 185-245
3/16 in (4.8 mm) AC 190-250
7/32 in (5.6 mm) DC+ 220-280
7/32 in (5.6 mm) AC 250-310

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.