Fleetweld 5P 14 Stick Electrode in 10 lb can"

Diameters / Packaging

Diameters
(3) 10 lb Easy Open Can
50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032562 ED010203
3/16 x 14 in (4.8 x 350 mm) ED010207
3/32 x 12 in (2.4 x 300 mm) ED032561 ED010211
5/32 x 14 in (4.0 x 350 mm) ED010216
7/32 x 18 in (5.6 x 450 mm) ED010219

Fleetweld® 5P® Stick Electrode (SMAW)

Stick (SMAW) | ED032561

CLASSIFICATIONS:
E6010

Mild Steel, Cellulosic • AWS E6010

DETAILS

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Features

  • Excellent vertical and overhead capability
  • Light slag with minimal arc interference
  • Deep arc penetration

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC-
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC-
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC-

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.