DETAILS
Lincoln Electric's combination of submerged arc wire and flux is designed to produce sizeable weld deposits with exceptional quality and bead appearance
Features
- Controlled Low Ferrite (Range 3-8)
- Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
- Exceeds 15 mils (0.38 mm) of lateral expansion @ -196°C (-320°F)
Typical Applications
- Power Generation
- LPG & LNG storage vessels
- Petrochemical
Welding Positions
- Not applicable
Shielding Gas
- N/A
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.9 | ER308, ER308L |
MECHANICAL PROPERTIES
Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F) |
Lateral Expansion
mil @ -196 °C (-320 °F) |
Flux |
---|---|---|---|---|---|---|
Typical Result | 400 (59) | 560 (81) | 38 | 46 (34) | 20 | Lincolnweld® P2007™ |
WIRE COMPOSITION
Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ER308 Requirement | 0.08 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
ER308L Requirement | 0.03 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
Typical Result | 0.02-0.03 | 19.6-20.0 | 0.02-0.14 | 1.6-1.8 | 0.18 max. | 0.05-0.09 | 0.02 max. | 10.6-10.8 | 0.01-0.02 | 0.01 | 0.35-0.42 | 3-6 | 4-6 |
TYPICAL OPERATING PROCEDURES
Diameter |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|
5/64" (2.0 mm) | 2.0-6.1 (80-240) | 24.0-30.0 | 190-500 |
3/32" (2.4 mm) | 1.5-5.3 (60-210) | 26.0-32.0 | 195-575 |
1/8" (3.2 mm) | 0.9-2.8 (35-110) | 28.0-34.0 | 200-700 |
5/32" (4.0 mm) | 0.8-1.9 (30-75) | 30.0-36.0 | 320-775 |
Lincolnweld® P2007™ | |||
Lincolnweld® P2007™ | |||
Lincolnweld® P2007™ | |||
Lincolnweld® P2007™ |