Submerged Arc Family

Lincolnweld® 316/316L

Submerged Arc (SAW)

AWS: ER316, ER316L

Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit

DETAILS

Lincoln Electric's combination of submerged arc wire and flux is designed to produce sizeable weld deposits with exceptional quality and bead appearance

Features

  • Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit
  • The 2-3% molybdenum improves pitting corrosion resistance of the weld deposit
  • Low carbon content recommended where there is a risk of intergranular corrosion

Typical Applications

  • General Fabrication
  • Maintenance and Repair Welding
  • Chemical processing

Welding Positions

  • Not applicable

Shielding Gas

  • N/A

Special Features

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316, ER316L
ISO ISO 14343-B SS316L
ABS AWS A5.9 ER316, ER316L
CWB CSA W48 ER316, ER316L
MIL MIL-E-19933E AMD1 MIL-316L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Lincolnweld® P2007™ Typical Result 390 (57) 559 (81) 39

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316L Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.01-0.02 18.5-19.1 0.03-0.13 1.4-1.8 2.2-2.6 0.03-0.04 0.01 max. 11.8-12.3 0.02 0.01 max. 0.32-0.40 8-12 7-11

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

TYPICAL OPERATING PROCEDURES

Diameter Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
5/64 in (2.0 mm) 2.0-6.1 (80-240) 24-30 190-500
3/32 in (2.4 mm) 1.5-5.3 (60-210) 26-32 195-575
1/8 in (3.2 mm) 0.9-2.8 (35-110) 28-34 200-700
5/32 in (4.0 mm) 0.8-1.9 (30-75) 30-36 320-775