Diameters / Packaging
Diameters |
600 lb (272 kg) Speed-Feed® Drum |
---|---|
1/8 in (3.2 mm) | ED018557 |
DETAILS
Lincore® 423Cr Metal-Cored Submerged Arc Wire is recommended to be used with primary 802 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by contacting your Lincoln Electric representative. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
Features
- Metal-cored wire with a higher chrome deposit than Lincore® 423L for improved corrosion resistance
- Works well with Lincolnweld® 802 Flux
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C |
---|---|---|
Lincolnweld® 802® | Typical Result | 41-47 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Mo | %Ni | %Si | %V |
---|---|---|---|---|---|---|---|---|
Lincolnweld® 802® | Typical Result | 0.15 | 13.5 | 1.2 | 1.0 | 2.0 | 0.4 | 0.15 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
3/32 in (2.4 mm) | DC+ | 1.7 (65) | 24 | 250 |
3/32 in (2.4 mm) | DC+ | 3.0 (120) | 28 | 350 |
3/32 in (2.4 mm) | DC+ | 4.4 (175) | 31 | 450 |
1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 375 |
1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 540 |
1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 640 |