Hardfacing Consumables Family Group

Lincore® 8620

Submerged Arc (SAW)

Ideal for building up on arbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing.

DETAILS

Ideal for building up on carbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing. Great compressive strength under heavy loading. Deposits are generally crack free, machinable and can be flame cut. Deposit thickness is unlimited.

Features

  • Metal-cored wire for build-up on worn rolls
  • A little softer than Lincore® 20 for easier machining
  • Works great with Lincolnweld® 801® or Lincolnweld® 802®

Typical Applications

  • Crane, Kiln
  • Roll, Mine Car
  • Shovel, Tractor

Welding Positions

  • Flat/Horizontal

Special Features

  • Used for 8620 type rolls

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 16-20

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Mo %Ni %Si
Lincolnweld® 801® Typical Result 0.09 0.45 0.80 0.15 0.55 0.30

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
1/8 in (3.2 mm) DC+ 1.5 (60) 26 400
1/8 in (3.2 mm) DC+ 2.5 (100) 28 550
1/8 in (3.2 mm) DC+ 3.6 (140) 30 680