Hardfacing Consumables Family Group

Lincore® 96-S

Submerged Arc (SAW)

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear.

DETAILS

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear.

Features

  • Metal-cored wire which produces a high carbon, 420 stainless steel deposit
  • Use where a higher hardness is required
  • Can be used on work rolls and backup rolls when water spray causes pitting on tool steel deposits

Typical Applications

  • Crane, Drive, Extrusion
  • Kiln, Mine Car, Power Generation
  • Rail, Roll, Shovel
  • Tractor, Wheel

Welding Positions

  • Flat/Horizontal

Shielding Gas

Special Features

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 48-54

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Si
Lincolnweld® 801® Typical Result 0.23 13.0 1.2 0.4

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 250
3/32 in (2.4 mm) DC+ 2.5 (100) 28 525
3/32 in (2.4 mm) DC+ 4.4 (175) 31 450
1/8 in (3.2 mm) DC+ 1.5 (60) 26 360
1/8 in (3.2 mm) DC+ 2.5 (100) 28 525
1/8 in (3.2 mm) DC+ 3.6 (140) 30 635
5/32 in (4.0 mm) DC+ 1.4 (55) 27 450
5/32 in (4.0 mm) DC+ 2.2 (85) 30 650
5/32 in (4.0 mm) DC+ 2.9 (115) 32 775