Menu Close
Pipeliner Family

Diameters / Packaging

Diameters
 10 lb Spool
 25 lb Spool
1.2 mm (0.047 in) ED033807 ED033808

Pipeliner® 101M

Flux-Cored Gas-Shielded (FCAW-G)

CLASSIFICATIONS:
E101T1-GM
E101T1-M21A4-K11

Pipeliner® 101M from Lincoln Electric is designed for hot, fill and cap pass welding on up to X80 grade pipe.

Diameter

Select Diameter

  • 1.2 mm (0.047 in)

Package

Select Package

  • 10 lb Spool
  • 25 lb Spool
Buy Now

DETAILS

A gas-shielded, flux-cored wire designed for hot, fill and cap pass welding on up to X80 grade pipe.

Features

  • Consistent Arc – designed for optimal performance in automated pipe welding applications where a consistent arc length is critical
  • Flat Bead Shape – fast freezing slag provides consistent puddle support all the way around the pipe
  • Impact Toughness – Capable of producing weld deposits with impact toughness exceeding 27J (20ftlbf) at -40C (-40F)
  • Q2 Lot® - Certificate showing actual deposit chemistry and mechanical properties per lot available online
  • ProTech® foil bag packaging
  • Q2 Lot® Control and Tested – certificate showing actual deposit chemistry and mechanical properties per lot available online
  • ProTech® Packaging – hermetically sealed packaging for moisture resistance.

Typical Applications

  • Hot, fill and cap pass welding on up to X80 grade pipe
  • Fully automated pipe welding
  • Semi-automated pipe welding
  • Meets hardness and chemistry requirements for NACE

Welding Positions

  • All

Shielding Gas

  • Mixed Shielding Gas

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E101T1-GM
AWS AWS A5.36 E101T1-M21A4-K11

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E101T1-GM Requirement 75-80% Ar, balance CO2 DC+ 610 (88) min. 690-830 (100-120) 16 min.
E101T1-M21A4-K11 Requirement M21-ArC DC+ 610 (88) min. 690-830 (100-120) 16 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 630 (92) 690-740 (100-107) 19 52-120 (38-88)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V
E101T1-GM Requirement 75-80% Ar, balance CO2 DC+ Info. Only 0.30 min. * 0.50 min. * 0.20 min. * 0.50 min. * 0.030 max. 0.030 max. 1.00 max. 0.10 min. *
E101T1-M21A4-K11 Requirement M21-ArC DC+ 0.15 max. 0.20 max. 1.00 - 2.50 0.50 max. 0.40 - 1.00 0.030 max. 0.030 max. 0.80 max. 0.05 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.004-0.0043 0.06-0.07 0.06 1.48-1.64 0.34-0.39 0.76-0.86 0.015 max. 0.010 max. 0.26-0.30 0.01

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.2 mm (0.045 in) 75-80% Ar / balance CO2 DC+ 19 (3/4) 4.4-10.2 (175-400) 23-30 130-275 1.8-4.1 (3.9-9.0)

NOTES

Note
* To meet the requirements of a "G" classification, the chemical composition of the weld deposit must meet the minimum requirement for one or more of these elements.