50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

Stick (SMAW) Electrode

AWS: E7010-P1, E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1 also meets AWS E7010-G

DETAILS

Features

  • Light slag for minimal arc interference
  • Deep penetration
  • Clean, visible weld puddle
  • Superior puddle control

Typical Applications

  • Hot, fill and cap pass of up to X65 grade pipe
  • Root pass welding of up to X80 grade pipe

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Service Information

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-P1
ABS AWS A5.5 E7010-P1
CWB CSA W48 E4910-P1

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (62-70) 530-580 (76-85) 22-29 27-96 (20-71)

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.08-0.16 0.01-0.04 0.43-0.53 0.26-0.33 0.01-0.04 0.01 0.01 max. 0.06-0.18 0.005 max.

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
1/8 in (3.2 mm) DC+ 75-130
5/32 in (4.0 mm) DC+ 90-185
3/16 in (4.8 mm) DC+ 140-225