Menu Cerrar
50 lb Can of Lincoln Electric Stick Electrodes

Diámetros / Embalaje

Diámetros
mm 		(3) 10 lb Easy Open Can
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032607 ED031976
3/16 x 14 in (4.8 x 350 mm) ED031978
3/32 x 14 in (2.4 x 350 mm) ED031975
5/32 x 14 in (4.0 x 350 mm) ED032608 ED031977

EXCALIBUR® 11018M MR®

Soldadura de Arco Metálico Protegido (SMAW) | ED031978

CLASIFICACIONES:
E11018M-H4R

Low Alloy, Low Hydrogen • AWS E11018M H4R

Diámetro

Seleccionar diámetro

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquete

Desencadenar

  • 50 lb Easy Open Can

Detalles

Low alloy stick electrode designed for General fabrication of high strength steels

Características

  • Square coating burn-off
  • Easy strike
  • Easy slag removal
  • Premium arc performance

Servicio de información

También puede necesitar

50 lb Can of Lincoln Electric Stick Electrodes

EXCALIBUR® 11018M MR®

ED031975
50 lb Can of Lincoln Electric Stick Electrodes

EXCALIBUR® 11018M MR®

ED031976
50 lb Can of Lincoln Electric Stick Electrodes

EXCALIBUR® 11018M MR®

ED031977
Generic 8lb can

EXCALIBUR® 11018M MR®

ED032607
Ver todo

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E11018M-H4R
ABS ABS - Part 2 4YQ620 H5
ABS AWS A5.5 E11018M-H4R
CWB AWS A5.5 E11018M-H4R
CWB CWB AWS A5.5 E7618M-H4R (E11018M-H4R)
DNV-GL DNV - 2.9 4 Y62H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Hardness Rockwell B
E11018M-H4R Requirement 680-760 (98-110) 760 (110) min. 20 min. 27 (20) min.
Typical Result, As-welded 700-750 (101-109) 760-810 (110-117) 21-25 52-110 (38-81) 98-103

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E11018M-H4R Requirement 0.10 max. 0.40 max. 1.30 - 1.80 0.25 - 0.50 1.25 - 2.50 0.030 max. 0.030 max. 0.60 max. 0.05 max. 4 max. 0.15 max. 0.4 max.
Typical Result 0.05-0.06 0.04-0.13 1.59-1.80 0.42-0.49 2.22-2.50 0.009-0.012 0.005-0.010 0.40-0.49 0.01 max. 1.4-3 0.02-0.11 0.1-0.3

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3/32 in (2.4 mm) DC+ 70-110
1/8 in (3.2 mm) DC+ 90-160
5/32 in (4.0 mm) DC+ 130-210
3/16 in (4.8 mm) DC+ 180-300