25lb plastic spool Innershield NR-305

Diámetros / Embalaje

Diameters
33 LB SPOOL
0.045 IN ED032204
0.052 IN ED032280
1/16 IN ED032205

UltraCore® 81Ni1C-H

Alambre Tubular Protegido con Gas (FCAW-G) | ED032204

AWS: E81T1-Ni1C-JH4, E81T1-C1A4-Ni1-H4

UltraCore® 81Ni1C-H diseñado para soldadura con gas de protección 100% CO2

Detalles

Designed for high strength, low-alloy applications using 100% CO2. These electrodes exhibit robust impact properties, even with a notch offset of 2.5 mm from weld centerline, as well as superior crack resistance, due to low diffusible hydrogen levels (4mL/100 grams of weld deposit max).

Características

  • Capable of producing weld deposits with impact toughness exceeding 88 - 123 J (65 - 91 ft·lbf) at -40°C (-40°F)
  • Designed for welding with 100% CO2 shielding gas
  • Premium arc performance and bead appearance
  • Meets AWS D1.8 seismic lot waiver requirements
  • ProTech® foil bag packaging
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

También puede necesitar

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-Ni1C-JH4
AWS AWS A5.36 E81T1-C1A4-Ni1-H4
ABS ABS - Part 2 4YQ460SA H5
CWB CSA W48 E551T1-C1A4-Ni1-H4 (E551T1-Ni1C-JH4)
DNV-GL DNV - 2.9 IV Y46MS H5
LR LR - Chapter 11 4Y46S H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E81T1-Ni1C-JH4 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-C1A4-Ni1-H4 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 510 (74) 570-640 (83-92) 22 85-150 (63-111) 47-153 (35-113)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E81T1-Ni1C-JH4 Requirement 100% CO2 DC+ 0.12 max. 0.15 max. 1.50 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4.0 max.
E81T1-C1A4-Ni1-H4 Requirement 100% CO2 DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
Typical Result 100% CO2 DC+ 0.0050-0.006 0.04-0.05 0.04-0.06 1.12-1.42 0.01 0.81-1.00 0.012 max. 0.010 max. 0.24-0.35 0.02-0.03 1.7-3.2

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Melt-off Rate
kg/hr (lb/hr)
Deposition Rate
kg/hr (lb/hr)
Efficiency
%
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 4.4 (175) 23-28 140 1.8 (4.0) 1.6 (3.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 24-29 150 2.1 (4.6) 1.8 (4.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-30 165 2.6 (5.7) 2.3 (5.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 25-30 190 3.1 (6.8) 2.7 (6.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 26-31 205 3.6 (8.0) 3.2 (7.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 26-31 225 3.9 (8.6) 3.4 (7.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 10.8 (425) 27-32 245 4.4 (9.7) 3.8 (8.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.1 (475) 28-33 265 4.9 (10.8) 4.3 (9.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 29-34 275 5.2 (11.4) 4.5 (10.0) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 23-28 150 2.0 (4.5) 1.8 (3.9) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 4.7 (185) 24-29 165 2.5 (5.5) 2.2 (4.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 24-29 190 3.1 (6.7) 2.7 (5.9) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-30 215 3.4 (7.5) 2.9 (6.5) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.0 (275) 25-30 235 3.7 (8.2) 3.2 (7.2) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 26-31 255 4.1 (9.0) 3.5 (7.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 8.5 (335) 26-31 275 4.5 (10.0) 4.0 (8.7) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 27-32 295 5.1 (11.2) 4.4 (9.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 10.2 (400) 27-34 310 5.4 (12.0) 4.7 (10.4) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 24-29 200 2.9 (6.3) 2.5 (5.5) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 4.4 (175) 24-30 210 3.3 (7.4) 2.9 (6.4) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 25-30 235 3.8 (8.4) 3.3 (7.3) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 25-31 265 4.3 (9.5) 3.7 (8.2) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 26-31 285 4.8 (10.5) 4.2 (9.2) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 7.0 (275) 26-32 305 5.3 (11.6) 4.6 (10.1) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.3 (325) 27-32 335 6.2 (13.7) 5.4 (11.9) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 28-34 365 6.7 (14.7) 5.8 (12.8) 86-88

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.
NOTE 1: FEMA and AWS D1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
NOTE 2: This product contains micro-alloying elements. Additional information available upon request.