Menu Close
Innershield Family

Diameters / Packaging

Diameters
 (4) 14 lb Coil
 50 lb Coil
5/64 in (2.0 mm) ED012385 ED012386

Innershield® NR®-203 Nickel (1%)

Flux-Cored Self-Shielded (FCAW-S)

AWS:
E71T8-Ni1-H16
E71T8-A2-Ni1-H16

Innershield® NR®-203 Nickel (1%) from Lincoln Electric is designed to produce a nickel bearing weld deposit with impact properties capable of exceeding 27 J (20 ft·lbf) at -29°C (-20°F).

Diamètre

Sélectionnez le diamètre

  • 5/64 in (2.0 mm)

Paquet

Sélectionnez un forfait

  • (4) 14 lb Coil
  • 50 lb Coil
Acheter maintenant

Détails

Designed to produce a nickel bearing weld deposit with impact properties capable of exceeding 27 J (20 ft·lbf) at -29°C (-20°F). It handles poor fit-up in the vertical up position and welds gaps up to 9.5 mm (3/8 in).

Traits

  • Designed to produce a nickel bearing weld deposit
  • Capable of producing weld deposits with impact toughness exceeding 27 J (20 ft·lbf) at -29°C (-20°F)
  • Color match on weathering steels
  • Handles poor fit-up
  • Root bead capability

Applications typiques

  • Roundabout groove welds on heavy wall tubular construction
  • Offshore
  • Bridges and other structural components made from weathering steels
  • Structural fabrication
  • NACE applications

Positions de soudage

  • All

Gaz de protection

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

K126 Classic 350A FCAW-SS

Pistolets de soudage K126® Classic 350 A FCAW-SS 4,5 m (15 pi) 062-332

K126-2
Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR® -211-MP

ED030638
Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR®-232

ED030647
Gun Receiver Bushing

Gun Receiver Bushing for Lincoln Electric® Guns

K1500-1
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E71T8-Ni1-H8
ABS ABS - Part 2 3YSA
CWB CSA W48 E491T8-A3-Ni1-H16 (E491T8-Ni1-H16)
DNV-GL DNV - 2.9 III YMS H10
DB ISO 17632-A T 42 3 1Ni Y N 1 H10
LR LR - Chapter 11 3YS H15

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E71T8-Ni1-H8 Requirement DC- 400 (58) min. 480-620 (70-90) 20 min. 27 (20) min.
Typical Result, As-welded DC- 400 (58) 510-580 (74-84) 22 120-218 (89-161) 72-110 (53-81)

DEPOSIT COMPOSITION

Classification Polarity %Al %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
Typical Result DC- 0.7-1.0 0.0014 0.06-0.10 0.02-0.04 1.08-1.23 0.01 0.86-1.00 0.010 0.004 0.25-0.29 0.01 3.9

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
5/64 in (2.0 mm) DC- 25 (1) 1.3 (50) 16-17 145 1.4 (3.0) 1.0 (2.3) 76
5/64 in (2.0 mm) DC- 25 (1) 1.8 (70) 18-19 195 2.0 (4.3) 1.5 (3.3) 76
5/64 in (2.0 mm) DC- 25 (1) 2.3 (90) 19-20 240 2.5 (5.5) 2.0 (4.3) 78
5/64 in (2.0 mm) DC- 25 (1) 2.8 (110) 20-21 275 3.0 (6.7) 2.4 (5.3) 79
5/64 in (2.0 mm) DC- 25 (1) 3.0 (120) 21-22 290 3.3 (7.3) 2.6 (5.8) 79
5/64 in (2.0 mm) DC- 25 (1) 3.5 (140) 22-23 310 3.9 (8.5) 3.0 (6.9) 81