Diameters / Packaging
Diameters |
600 lb (272 kg) Speed-Feed® Drum |
---|---|
1/8 in (3.2 mm) | ED018551 |
Détails
Lincore® 423L Metal-Cored Submerged Arc Wire typical application on Caster rolls, recommended to be used primary 802 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by contacting your Lincoln Electric representative. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
Traits
- Metal-cored wire, provides a softer “as-welded” deposit than Lincore® 420
- More resistance to softening during tempering above 482°C (900°F)
Applications typiques
- Caster rolls
Positions de soudage
- Flat/Horizontal
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C |
---|---|---|
Lincolnweld® 802® | Typical Result | 41-47 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Mo | %Ni | %Si | %V |
---|---|---|---|---|---|---|---|---|
Lincolnweld® 802® | Typical Result | 0.15 | 11.5 | 1.2 | 1.0 | 2.0 | 0.4 | 0.15 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 350 |
1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 500 |
1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 610 |