Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED036325 ED035314
5/32 x 14 in (4.0 x 350 mm) ED036327

Millennium Arc® 7018-1

Stick (SMAW)

AWS:
E7018-1

Mild Steel, Low Hydrogen • AWS E7018-1 H4R

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Acheter maintenant

Détails

Low temperature Charpy V-Notch properties

Traits

  • Moisture pick-up resistant
  • Clear weld puddle without slag interference
  • Effortless slag removal
  • No intentional addition of zinc for moisture resistance

Applications typiques

  • Power generation
  • Structure
  • Chemical processing structure
  • Pressure piping

Positions de soudage

  • All except vertical down

Gaz de protection

  • Not Applicable

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018-1 H4R
ABS ABS - Part 2 3YH5
CWB CSA W48 E4918-1-H4
DNV-GL DNV - 2.9 3YH5
LR LR - Chapter 11 3YM H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Hardness Rockwell B
E7018-1 H4R Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (62-71) 530-590 (78-85) 26-37 35-160 (26-118) 85-88

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E7018-1 H4R Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.3 max. 0.4 max.
Typical Result 0.05-0.08 0.02-0.04 1.21-1.45 0.14 max. 0.01-0.02 0.008-0.013 0.005-0.021 0.33-0.63 0.01 1.26-1.65 1-4 0.2 max. 0.1-0.3

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 70-110
3/32 in (2.4 mm) AC 80-120
1/8 in (3.2 mm) DC+ 90-160
1/8 in (3.2 mm) AC 100-160
5/32 in (4.0 mm) DC+ 120-220
5/32 in (4.0 mm) AC 130-220
5.0 mm DC+ 150-300
5.0 mm AC 160-320
6.0 mm DC+ 200-370
6.0 mm AC 220-360

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.