Diameters / Packaging
Diameters |
---|
Détails
Alloy 4145 with high Silicon around 10% with low melting temperature and high fluidity.Low susceptibility to weld cracking on Aluminum copper alloys.
Traits
- Alloy 4145 with High Silicon content about 10% and has low melting temperature and high fluidity
- Low susceptibility to cracking to weld 2XXX alloys
- Bright looking welds and less smut
Positions de soudage
- All except vertical down
Gaz de protection
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.10 | ER4145 |
WIRE COMPOSITION
Classification | %Be | %Mg | %Zn | %Cr | %Cu | %Fe | %Mn | %Si |
---|---|---|---|---|---|---|---|---|
ER4145 Requirement | 0.0003 max. | 0.15 max. | 0.20 max. | 0.15 max. | 3.3 - 4.7 | 0.8 max. | 0.15 max. | 9.3 - 10.7 |
Typical Result | 0.0000 | 0.07 | 0.01 | 0.01 | 3.6 | 0.3 | 0.01 | 9.7 |
TYPICAL OPERATING PROCEDURES
Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|---|---|---|
0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 14.9 (585) | 23.3 | 170 |
1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 8.9 (350) | 25.2 | 195 |
1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 6.4 (250) | 24.0 | 240 |