Détails
Alloy 5356 TIG is used when 40,000 PSI is not a requirement. Suitable for all position non- heat treatable welding applications and recommended for welding 5XXX or 6XXX cast and wrought aluminum alloys
Traits
- Aluminum-magnesium alloy for use on many weldable cast and wrought aluminum alloys
- Excellent for color matching after anodizing
- Alloy embossed on each rod for easy identification
- General purpose filler alloy for 5XXX and 6XXX series alloys
- High strength filler metal
Positions de soudage
- All
Gaz de protection
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.10 | ER5356 |
WIRE COMPOSITION
Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
---|---|---|---|---|---|---|---|---|---|
ER5356 Requirement | 0.0003 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 4.5 - 5.5 | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 | 0.10 max. |
Typical Result | 0.0002 max. | 0.12 | 0.00 | 0.11 | 4.9 | 0.12 | 0.06 | 0.10 | 0.01 |