Diameters / Packaging
Diameters |
10 lb Carton |
---|---|
3/32 in (2.4 mm) | ED034177 |
Détails
SuperGlaze 5556 is a high strength Aluminum Magnesium Manganese alloy. It is commonly used for welding high strength base materials like 5083 and provides good strength on 6XXX base materials.
Traits
- • Provides higher tensile strengths for welding of higher strength 5XXX alloys
- • Increased amounts of magnesium and manganese for excellent corrosion resistance
- • High Columnar strength in welds
Positions de soudage
- All except vertical down
Gaz de protection
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.10 | ER5556 |
WIRE COMPOSITION
Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
---|---|---|---|---|---|---|---|---|---|
ER5556 Requirement | 0.0003 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 4.7 - 5.5 | 0.50 - 1.0 | 0.25 max. | 0.05 - 0.20 | 0.25 max. |
Typical Result | 0.0002 max. | 0.07 | 0.00 | 0.13 | 4.9 | 0.7 | 0.06 | 0.08 | 0.00 |