SuperGlaze Aluminum MIG Wire Family

Diameters / Packaging

Diameters
7 KG SPOOL (Canada Only)
7KG SPOOL (BS300)
1 MM ED701766
1.2 mm ED701767

SuperGlaze® 5754

MIG (GMAW) Wire

AWS: ER5754

Aluminum Welding Wire

Détails

Alloy 5753 has good corrosion resistance in marine applications. with high strength and workability it is commonly used in pressure vessels.

Traits

  • • Magnesium alloyed aluminium for welding of alloys with a maximum of 3.5%
  • • Good corrosion resistance and excellent colour match after anodizing
  • • Suitable for a wide range of applications in general construction and structural industry

Applications typiques

Positions de soudage

  • All except vertical down

Gaz de protection

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Caractéristiques spéciales

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5754

WIRE COMPOSITION

Classification %Be %Cr %Cu %Fe %Mg %Mn %Si %Ti %Zn
ER5754 Requirement 0.0003 max. 0.30 max. 0.10 max. 0.40 max. 2.6 - 3.6 0.50 max. 0.40 max. 0.15 max. 0.20 max.
Typical Result 0.0001 0.06 0.01 0.13 3.0 0.29 0.07 0.05 0.00

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH)
Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 19.6 (770) 21.6 185
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 12.7 (500) 23.0 210
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 9.1 (360) 24.8 280
2.4 mm (3/32") 100% Ar 85 (180) DC+ 19.0 (³/₄) 8.0 (315) 28.0 500
3.2 mm (1/8") 100% Ar 85 (180) DC+ 19.0 (³/₄) 5.1 (200) 30.3 535