Menu Close
UltraCore, 50 lb Fiber Spool

Diameters / Packaging

Diameters
 (4) 15 lb Plastic Spool
 33 lb Spool
 33 lb Spool Buy America
 50 lb Spool
 500 lb Accu-Trak® Drum
0.045 in (1.1 mm) ED033986 ED033989 ED033992
0.052 in (1.3 mm) ED033990 ED033993 ED036442
1/16 in (1.6 mm) ED033988 ED033991 ED036619 ED033994

UltraCore® HD-M

Flux-Cored Gas-Shielded (FCAW-G)

AWS:
E71T-9M-H8
E71T1-M21A2-CS1-H8

UltraCore® HD-M from Lincoln Electric is a mild steel, gas-shielded flux-cored wire designed to provide high deposition rates and flat bead appearance.

Diamètre

Sélectionnez le diamètre

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • (4) 15 lb Plastic Spool
  • 33 lb Spool
  • 33 lb Spool Buy America
  • 50 lb Spool
  • 500 lb Accu-Trak® Drum
Acheter maintenant

Détails

UltraCore® HD-M is a mild steel, gas-shielded flux-cored wire designed to provide high deposition rates and flat bead appearance required in many out-of-position applications.

Traits

  • High Deposition Rates – increase weld deposition up to 10 lbs/hr out-of-position
  • Flat Bead

Applications typiques

  • Shipbuilding
  • General fabrication

Positions de soudage

  • All

Gaz de protection

  • Mixed Shielding Gas

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2
Accu-Trak Drum

Outershield® 71 Elite

ED029387
Accu-Trak Drum

Outershield® 71M Flux-cored (FCAW-G) Wire

ED029779
UltraCore, Metalshield, 500 lb Accu-Trak Drum

UltraCore® 71A75 Dual Flux-cored (FCAW-G) Wire

ED032046
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1M-H8, E71T-9M-H8
AWS AWS A5.36 E71T1-M21A2-CS1-H8
ABS ABS - Part 2 3YSA H10
CWB CSA W48 E491T1-M21A3-CS1-H8 (E491T-9M-H8)
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H10

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T-1M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 540 (78) 600-650 (87-95) 22 34-39 (25-29) 29-128 (21-94)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-1M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.003-0.0068 0.04-0.06 1.35-1.58 0.01-0.015 0.01 max. 0.45-0.58 3.3-8

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 4.4 (175) 21-26 130 1.8 (4.0) 1.6 (3.5) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 6.4 (250) 22-27 155 2.6 (5.7) 2.3 (5.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.6 (300) 23-28 170 3.1 (6.9) 2.7 (6.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.9 (350) 23-29 190 3.6 (8.0) 3.2 (7.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 10.2 (400) 25-30 205 4.1 (9.1) 3.6 (8.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 11.4 (450) 26-31 225 4.7 (10.3) 4.1 (9.0) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 12.7 (500) 27-33 230 5.2 (11.4) 4.5 (9.9) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 14.0 (550) 28-33 245 5.7 (12.6) 4.9 (10.9) 87 - 88
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 25 (1) 15.2 (600) 28-34 265 6.2 (13.7) 5.4 (11.9) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 3.8 (150) 22-26 145 2.0 (4.5) 1.8 (3.9) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.1 (200) 23-27 170 2.7 (6.0) 2.4 (5.2) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 6.4 (250) 23-28 190 3.4 (7.5) 2.9 (6.5) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.6 (300) 24-29 215 4.1 (9.0) 3.5 (7.8) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.9 (350) 24-30 235 4.8 (10.5) 4.1 (9.1) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 9.5 (375) 25-30 250 5.1 (11.2) 4.4 (9.8) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 10.8 (425) 26-31 270 5.8 (12.7) 5.0 (11.1) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 12.1 (475) 26-32 295 6.4 (14.2) 5.6 (12.4) 87 - 88
.052" (1.3 mm) 75% Ar / 25% CO2 DC+ 25 (1) 12.7 (500) 27-33 305 6.8 (15.0) 5.9 (13.0) 87 - 88
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 3.8 (150) 22 - 26 195 2.9 (6.3) 2.5 (5.5) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 4.4 (175) 23 - 26 215 3.4 (7.4) 2.9 (6.4) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.1 (200) 23 - 27 235 3.8 (8.4) 3.3 (7.3) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.7 (225) 24 - 28 255 4.3 (9.5) 3.7 (8.2) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 6.4 (250) 25 - 29 270 4.8 (10.5) 4.1 (9.1) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.6 (300) 25 - 30 310 5.7 (12.6) 5.0 (11.0) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.3 (325) 26 - 31 330 6.2 (13.7) 5.4 (11.9) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 8.9 (350) 28 - 32 350 6.7 (14.7) 5.8 (12.8) 86 -87
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 10.2 (400) 28 - 33 390 7.6 (16.8) 6.6 (14.6) 86 -87

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.