Diameters / Packaging
|
Diameters |
600 lb Speed Feed® Drum |
|---|---|
| 3/32 in (2.4 mm) | ED012699 |
Détails
Designed for high speed single pass welding applications. Recommended for flat and horizontal positions with maximum steel thickness up to 4.8 mm (3/16 in).
Traits
- Fast travel speeds
- Increased resistance to porosity
- Consistent bead appearance
- Warning: NR-5 is NOT recommended for welding multiple passes.
Applications typiques
- Single pass welding on up to 48 mm (3/16 in) thicknesses
- 3 o'clock welding positions
- Welds with copper back-up
- Propane cylinders
- Robotics/Hard Automation
Positions de soudage
- Flat/Horizontal
Gaz de protection
- N/A
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.20 | E70T-3 |
| AWS | AWS A5.36 | E70T3S |
MECHANICAL PROPERTIES
| Classification | Polarity |
Transverse Tensile Strength
MPa (ksi) |
Longitudinal Face Bend |
|---|---|---|---|
| E70T-3 Requirement | DC+ | 480 (70) min. | No opening in excess of 1/8 inch |
| Typical Result, As-welded | DC+ | 530-570 (77-82) | Passed |
DEPOSIT COMPOSITION
| Classification | Polarity | %Al | %C | %Mn | %P | %S | %Si | %Ti |
|---|---|---|---|---|---|---|---|---|
| Typical Result | DC+ | 0.12-0.18 | 0.15-0.17 | 0.82-0.96 | 0.014 max. | 0.015 max. | 0.37 | 0.500-0.580 |