Détails
Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear.
Traits
- Metal-cored wire which produces a high carbon 420 stainless steel deposit
- Used on rolls and backup rolls when water spray causes pitting on tool steel deposits
- Used on rolls and backup rolls when water spray causes pitting on tool steel deposits
Applications typiques
- Castor Rolls
Positions de soudage
- Flat/Horizontal and circumferential
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Flux | Classification | Hardness Rockwell C |
|---|---|---|
| Lincolnweld® 801® | Typical Result | 53 |
DEPOSIT COMPOSITION
| Flux | Classification | %C | %Cr | %Mn | %Si |
|---|---|---|---|---|---|
| Lincolnweld® 801® | Typical Result | 0.26 | 12.0 | 1.1 | 0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|
| 1/8" (3.2 mm) | DC+ | 41 (1⁵/₈) | 2.7 (105) | 28 | 540 |