Détails
Traits
- For welding 0.50% molybdenum steel
- Deep penetration and superior puddle control
- Light slag for minimal arc interference
- Clean, visible weld puddle
Applications typiques
- API 5L X42 through X56 grade pipe
- Cross country and in-plant pipe
Positions de soudage
- All
Gaz de protection
- Not Applicable
Caractéristiques spéciales
- Designed for downhill welding on pipe
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-A1 |
| ISO | ISO 2560-B | E4910-G P |
| ABS | AWS A5.5 | E7010-A1 |
| CWB | CSA W48 | E4910-A1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Hardness Rockwell B |
|---|---|---|---|---|
| E7010-A1 Requirement | 390 (57) min. | 480 (70) min. | 22 min. | |
| Typical Result, 1 hour @ 620°C (1150°F) | 440-520 (64-75) | 530-630 (77-91) | 22-28 | 84-93 |
DEPOSIT COMPOSITION
| Classification | %C | %Mn | %Mo | %P | %S | %Si |
|---|---|---|---|---|---|---|
| E7010-A1 Requirement | 0.12 max. | 0.60 max. | 0.40 - 0.65 | 0.03 max. | 0.03 max. | 0.40 max. |
| Typical Result | 0.07-0.12 | 0.40-0.58 | 0.53-0.57 | 0.01 max. | 0.01 max. | 0.13-0.26 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 50-90 |
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-175 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |