Diamètres / Emballages
Diamètres |
---|
DÉTAILS
Blue Max® MIG wire is designed to perform exceptionally at high wire feed speeds
Caractéristiques
- The weld deposits exhibit high tensile strength and offer some resistance to abrasion
- Applications should be limited to 800°F (420°C)
- Austenite forming elements can pose considerable dilution, such as nickel, the microstructure of this product is two-phase - which delivers highly resistant to weld metal cracks and fissures.
- Q2 Lot® - Certificate showing actual wire composition and calculated ferrite number (FN) available online
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
Consultez le résultat de test Clause de non-responsabilité
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.9 | ER312 |
CWB | CSA W48 | ER312 |
WIRE COMPOSITION
Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ER312 Requirement | 0.15 max. | 28.0 - 32.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | 8.0 - 10.5 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | ||||
Typical Result | 0.10-0.12 | 30.4-31.4 | 0.02-0.15 | 1.8 | 0.03-0.21 | 0.05-0.06 | 0.01 max. | 9.0-10.1 | 0.02 | 0.003 max. | 0.36-0.43 | 46 | 70-74 |
TYPICAL OPERATING PROCEDURES
Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|
0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
1/16 in (1.6 mm) | 98% Ar / 2% O2 | 29-33 | 200-280 |