Diamètres / Emballages
Diamètres |
CAN 12.3 KG (3 x 4.1 KG, env. 351 pcs) |
CAN 12.9 KG (3 x 4.3 KG, env. 615 pcs) |
CAN 16.2 KG (3 x 5.4 KG, env. 240 pcs) |
---|---|---|---|
2.5 x 350 mm | CH9B9-25-1 | ||
3.2x350 mm | CH9B9-32-1 | ||
4.0x450 mm | CH9B9-40-1 |
DÉTAILS
Electrode enrobée AWS E9015-B91, faiblement alliée et à faible teneur en hydrogène, spécialement conçue pour les structures métalliques à haute fiabilité.température élevée de service
Caractéristiques
- Conçu pour résister à la corrosion à des températures élevées allant jusqu'à 600°C (1112°F)
- L'enrobage résistant à l'humidité fournit un niveau d'hydrogène diffusible bas dans le métal déposé permettant l'obtention de soudure saine
- arc doux
Exemples d'applications
- Raffineries de pétrole
- Appareils à pression
- Echangeurs de chaleur
- Centrales électriques
- Tuyauterie
Positions de soudage
- Toutes, sauf verticale descendante
Gaz de protection
- Non applicable
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
Consultez le résultat de test Clause de non-responsabilité
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.5 | E9015-B91 H4 |
ISO | ISO 3580-B | E 6216-9C1MV |
MECHANICAL PROPERTIES
Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
---|---|---|---|
E9015-B91 H4 Requirement | 530 (77) min. | 620 (90) min. | 17 min. |
E 6216-9C1MV Requirement | 530 (77) min. | 620 (90) min. | 15 min. |
Typical Result, Stress relieved | 590 (86) | 710 (103) | 22 |
DEPOSIT COMPOSITION
Classification | %Al | %C | %Cr | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | %Total Cu | %V | %Mn+Ni |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
E9015-B91 H4 Requirement | 0.04 max. | 0.08 - 0.13 | 8.0 - 10.5 | 1.20 max. | 0.85 - 1.20 | 0.02 - 0.07 | 0.02 - 0.10 | 0.80 max. | 0.01 max. | 0.01 max. | 0.30 max. | 0.25 max. | 0.15 - 0.30 | 1.40 max. |
E 6216-9C1MV Requirement | 0.04 max. | 0.08 - 0.13 | 8.0 - 10.0 | 1.25 max. | 0.85 - 1.20 | 0.02 - 0.07 | 0.02 - 0.10 | 1.0 max. | 0.01 max. | 0.01 max. | 0.30 max. | 0.25 max. | 0.15 - 0.3 | 1.50 max. |
Typical Result | 0.01 | 0.10 | 9.0 | 0.55 | 1.00 | 0.05 | 0.04 | 0.30 | 0.01 | 0.01 | 0.25 | 0.05 | 0.20 | 0.85 |
TYPICAL OPERATING PROCEDURES
Diameter |
Current
Amps |
---|---|
2.5 mm (3/32") | 70-110 |
3.2 mm (1/8") | 80-140 |
4.0 mm (5/32") | 100-180 |
5.0 mm | 140-240 |