Diamètres / Emballages
Diamètres |
---|
DÉTAILS
Iron-based chromium carbide alloys designed for applications subject to abrasion accompanied by impact from rock, ore, clay, sand or cement, including digging or crusher surfaces or parts that must maintain sharp cutting edges. This product can be applied in multiple layers and may cross check crack. Metal-to- Earth hardfacing products can be used on carbon, low alloy, manganese, stainless and cast iron parts. Used in applications with abrasion accompanied by impact.
Caractéristiques
- Can be used on low carbon, medium carbon, low alloy, manganese and stainless steels
- Limited to 4 layers
- Delivers an abrasion resistant deposit, even under conditions of moderate impact
- Larger wire diameter sizes may be used for the submerged arc process
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
Consultez le résultat de test Clause de non-responsabilité
MECHANICAL PROPERTIES
Classification | Base Metal | Number of layer | Hardness Rockwell C |
---|---|---|---|
Typical Result | Mild Steel | 1 Layer | 34-37 |
Typical Result | Mild Steel | 2 Layers | 44-48 |
Typical Result | Mild Steel | 3 Layers | 48-52 |
Typical Result | 0.50% Carbon Steel | 1 Layer | 41-43 |
Typical Result | 0.50% Carbon Steel | 2 Layers | 47-50 |
Typical Result | 0.50% Carbon Steel | 3 Layers | 50-53 |
Typical Result | Austenitic Mn Steel | 2 Layers | 43-45 |
Typical Result | Austenitic Mn Steel | 3 Layers | 48-50 |
DEPOSIT COMPOSITION
Classification | Product Size | %Al | %C | %Cr | %Mn | %Mo | %Si |
---|---|---|---|---|---|---|---|
Typical Result | .045" (1.1 mm) | 0.6 | 2.4 | 11.4 | 1.3 | 0.0 | 1.0 |
Typical Result | 1/16" (1.6 mm) | 0.6 | 2.4 | 11.4 | 1.3 | 0.0 | 1.0 |
Typical Result | 5/64" (2.0 mm) | 0.6 | 2.0 | 9.2 | 0.9 | 0.5 | 1.0 |
Typical Result | 7/64" (2.8 mm) | 0.6 | 2.0 | 9.2 | 0.9 | 0.5 | 1.0 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
---|---|---|---|---|---|---|
.045" (1.1 mm) | DC+ | 25 (1) | 5.1 (200) | 19-21 | 120 | 1.9 (4.2) |
.045" (1.1 mm) | DC+ | 25 (1) | 10.2 (400) | 23-25 | 190 | 3.9 (8.5) |
.045" (1.1 mm) | DC+ | 25 (1) | 15.2 (600) | 27-29 | 250 | 5.8 (12.8) |
1/16" (1.6 mm) | DC+ | 25 (1) | 3.8 (150) | 22-24 | 175 | 2.7 (5.9) |
1/16" (1.6 mm) | DC+ | 25 (1) | 8.9 (350) | 29-31 | 325 | 6.2 (13.6) |
1/16" (1.6 mm) | DC+ | 25 (1) | 11.4 (450) | 32-34 | 365 | 7.9 (17.5) |
5/64" (2.0 mm) | DC+ | 32 (1) | 3.2 (125) | 27 | 210 | 3.4 (7.4) |
5/64" (2.0 mm) | DC+ | 32 (1) | 5.1 (200) | 31 | 325 | 5.4 (11.9) |
5/64" (2.0 mm) | DC+ | 32 (1) | 6.4 (250) | 33 | 380 | 6.8 (14.9) |
7/64" (2.8 mm) | DC+ | 32 (1) | 2.0 (80) | 26 | 315 | 3.9 (8.6) |
7/64" (2.8 mm) | DC+ | 32 (1) | 2.5 (100) | 27 | 375 | 4.9 (10.7) |
7/64" (2.8 mm) | DC+ | 32 (1) | 3.3 (130) | 29 | 450 | 6.4 (14.0) |
7/64" (2.8 mm) | DC+ | 64 (2) | 2.5 (100) | 27 | 315 | 4.9 (10.7) |
7/64" (2.8 mm) | DC+ | 64 (2) | 3.3 (130) | 29 | 370 | 6.4 (14.0) |
7/64" (2.8 mm) | DC+ | 64 (2) | 4.4 (175) | 31 | 450 | 8.6 (19.0) |