Lincore® 70-G

Iron-based wire with a large amount of chromium carbides in a hard matrix. Designed to exhibit stress-relieve cross-check cracking. They can be used on carbon, low alloy, manganese, stainless and cast iron parts. Deposit thicknesses are generally limited to 2 layers. Use in applications with severe abrasion accompanied by low or moderate impact, works best in Metal-to-Earth applications.

Caractéristiques

• Can be used on carbon and low alloy steel parts
• Deposit is limited to two layers
• Exceptional wear resistance with deposits that last approximately 2-3 times longer than most chrome carbide and complex carbide alloys, especially in wet abrasion applications
• Maintains high hardness after exposure to elevated temperature
• Running this wire as a GMAW-C wire with the recommended shielding gas will reduce fume compared to open arc (FCAW-S) applications
• Great for high value applications where downtime is costly or replacement parts are expensive