Menu Fermer
10 Pound Cans of Stick Electrode

Diamètres / Emballages

Diamètres
 (3) 10 lb Easy Open Can
4,0 x 350 mm (5/32 x 14 in) ED032633

Pipeliner® LH-D100

Soudage manuel à l'électrode enrobée (MMA)

CLASSIFICATION:
AWS A5.5 : E10045-P2 H4R

Low Alloy, Low Hydrogen, Pipe • AWS E10045-P2 H4R

Diamètre

Sélectionnez le diamètre

  • 4,0 x 350 mm (5/32 x 14 in)

Emballage

Sélectionnez l'emballage

  • (3) 10 lb Easy Open Can

DÉTAILS

See our educational video for technique and tips

Caractéristiques

  • 80% higher productivity over traditional vertical-up pipe welding
  • Durable coating
  • 80% higher productivity over traditional vertical-up pipe welding

Exemples d'applications

  • Fill and cap pass welding of up to X90 grade pipe
  • Pipe repair
  • Hot tapping

Positions de soudage

  • All

Gaz de protection

  • Not Applicable

Caractéristiques spéciales

  • Designed for low hydrogen vertical down welding on pipe

Service d'information

Vous pourriez avoir également besoin de

10 lb cans of Pipeliner LH-D stick electrode

PIPELINER® LH-D80

ED032627

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS

Consultez le résultat de test Clause de non-responsabilité

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E10045-P2 H4R
CWB CWB AWS A5.5 E6945-P2-H4R (E10045-P2-H4R)

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E10045-P2 H4R Requirement 600 (87) min. 690 (100) min. 16 min. 27 (20) min.
Typical Result, As-welded 650-700 (94-102) 710-750 (103-108) 23-26 77-114 (57-84) 42-85 (31-62) 96-99

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E10045-P2 H4R Requirement 0.12 max. 0.20 max. 0.90 - 1.70 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.80 max. 0.05 max. 4 max. 0.15 max. 0.4 max.
Typical Result 0.004-0.0051 0.05-0.06 0.04-0.06 1.44-1.67 0.40-0.46 0.78-0.89 0.01 0.01 0.42-0.56 0.01 2-4 0.03-0.13 0.2-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 120-170
4.0 mm (5/32 in) DC+ 170-250
4.5 mm (11/64 in) DC+ 200-300

NOTES

Note
NOTE: This product contains micro-alloying elements. Additional information available on request.