DÉTAILS
SuperGlaze 5183 is commonly used for higher strength welding of 5XXX and 6XXX base materials. It’s has higher columnar strength and uses less amperage for the same WFS as 4XXX filler metals.
Caractéristiques
- Transfert d'arc doux pour les applications 5183 les plus exigeantes
- Stabilité d'arc optimale et excellent dévidage
- Conçu pour les applications de soudage semi-automatique manuelles
- Best feeding performance - reduced shavings
Exemples d'applications
- Fabrication and maintenance navale
- Réservoirs cryogéniques
- Construction navale et autres applications structurelles en aluminium à haute résistance
- Wagons de train
- Industrie offshore
Gaz de protection
- I1 : Gaz inerte Ar (100 %), I3 : Mélanges Argon / Hélium, Débit :14-24 l/min (Argon)
Caractéristiques spéciales
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
Consultez le résultat de test Clause de non-responsabilité
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5183 |
| ABS | AWS A5.10 | ER5183 |
| BV | AWS A5.10 | ER5183 |
| CCS | AWS A5.10 | ER5183 |
| CWB | AWS A5.10 | ER5183 |
| DB | AWS A5.10 | ER5183 |
| DNV-GL | AWS A5.10 | ER5183 |
| KR | AWS A5.10 | ER5183 |
| LR | AWS A5.10 | ER5183 |
| RINA | AWS A5.10 | ER5183 |
| TUV | AWS A5.10 | ER5183 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Tensile Strength
MPa (ksi) |
|---|---|---|---|
| ER5183 Requirement | Not Specified | Not Specified | 275 (40) min. |
| Typical Result, As-welded | 100% Ar | DC+ | 280-310 (41-45) |
WIRE COMPOSITION
| Classification | %Al | %Be | %Cr | %Fe | %Mg | %Mn | %Si | %Ti | %Total Cu | %Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| ER5183 Requirement | Remainder | 0.0003 max. | 0.05 - 0.25 | 0.40 max. | 4.3 - 5.2 | 0.50 - 1.0 | 0.40 max. | 0.15 max. | 0.10 max. | 0.25 max. |
| Typical Result | Remainder | 0.0002 | 0.07 | 0.13 | 4.9 | 0.6 | 0.05 | 0.07 | 0.00 | 0.00 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 18 (709) | 23.3 | 180 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 13 (512) | 24.3 | 210 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 19 (³/₄) | 9 (354) | 25.1 | 280 |