Diamètres / Emballages
Diamètres |
8#CAN/24#CTN |
10#CAN/30#CTN |
---|---|---|
2,4 x 300 mm (3/32 x 12 in) | EL112093632 | |
3,2 x 350 mm (1/8 x 14 in) | EL112125634 | |
4,0 x 350 mm (5/32 x 14 in) | EL112156634 |
DÉTAILS
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Caractéristiques
- A covered electrode which is used to weld nickel-chromium-molybdenum alloys
- These electrodes are used in applications where the temperature ranges from cryogenic up to 1800°F (982°C)
- Q2 Lot® - certificates showing actual deposit composition available online
Exemples d'applications
- General Fabricaton
- Maintenance and Repair Welding
- Dissimilar joints between nickel-chromium molybdenum alloys to stainless steels, carbon or low alloys steels
Positions de soudage
- Polarity DC+
Gaz de protection
- N/A
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
Consultez le résultat de test Clause de non-responsabilité
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.11 | ENiCrMo-3 |
MECHANICAL PROPERTIES
Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
---|---|---|
ENiCrMo-3 Requirement | 760 (110) min. | 30 min. |
Typical Result, As-welded | 790 (114) | 44 |
DEPOSIT COMPOSITION
Classification | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Nb+Ta | %Ni+Co |
---|---|---|---|---|---|---|---|---|---|---|---|
ENiCrMo-3 Requirement | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 7.0 max. | 1.0 max. | 8.0 - 10.0 | 0.03 max. | 0.02 max. | 0.75 max. | 3.15 - 4.15 | 55.0 min. |
Typical Result | 0.04 | 22.7 | 0.00 | 1.4 | 0.5 | 8.5 | 0.01 | 0.00 | 0.33 | 3.55 | 62.5 |
TYPICAL OPERATING PROCEDURES
Diameter |
Current
Amps |
---|---|
3/32" (2.4 mm) | 65-85 |
1/8" (3.2 mm) | 80-110 |
5/32" (4.0 mm) | 110-140 |
3/16" (4.8 mm) | 110-160 |