Diamètres / Emballages
|
Diamètres |
8#CAN/24#CTN |
10#CAN/30#CTN |
|---|---|---|
| 1/8 in | EL117125634 | |
| 3/32 in | EL117093632 |
DÉTAILS
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Caractéristiques
- A covered electrode which is used to weld nickel-chromium-molybdenum alloys
- The deposited weld metal provides optimum strength and oxidation resistance between 1500°F to 2100°F, especially when welding on base metals of nickel-iron-chromium alloys
- Q2 Lot® - Certificate showing actual deposit composition available online
Exemples d'applications
- Heavy Fabrication
- Power Generation
- Heavy Equipment
Positions de soudage
- Polarity DC+
Gaz de protection
- N/A
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
Consultez le résultat de test Clause de non-responsabilité
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrCoMo-1 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrCoMo-1 Requirement | 620 (90) min. | 25 min. |
| Typical Result, As-welded | 770 (112) | 40 |
DEPOSIT COMPOSITION
| Classification | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %Nb+Ta |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrCoMo-1 Requirement | 0.05 - 0.15 | 9.0 - 15.0 | 21.0 - 26.0 | 0.50 max. | 5.0 max. | 0.3 - 2.5 | 8.0 - 10.0 | Remainder | 0.03 max. | 0.015 max. | 0.75 max. | 1.0 max. |
| Typical Result | 0.11 | 11.4 | 24.8 | 0.01 | 0.9 | 1.1 | 9.3 | 51 | 0.02 | 0.005 | 0.44 | 0.9 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 100-140 |
| 3/16" (4.8 mm) | 110-160 |