Menu Close
Filter Sort

Items 1 - 25 of 33

Image not found

LT-7 Drive Roll .052-1/16 in (1.3-1.6 mm) (2 required)

KP2268-1

LT-7 Drive Roll .052-1/16 in (1.3-1.6 mm) (2 required)
Image not found

LT-7 Drive Roll .068-3/32 (1.7-2.4 mm) (2 required)

KP2268-2

LT-7 Drive Roll .068-3/32 (1.7-2.7 mm) (2 required)
Flux Hopper for Tandem Arc

Flux Hopper

K389

Flux Hopper assembly for submerged arc applications. Includes flux hopper and mounting hardware.
Horizontal Head Adjuster

Horizontal Adjuster

K96

Horizontal Adjuster for submerged arc applications
Flat Fillet Adapter Kit

Flat Fillet Adapter Kit

K229

Flat Fillet Adapter Kit for LT-7 Tractor
Image not found

Drive Roll Outer 5/64-1/8 in (2.0-3.1 mm) Twinarc®

KP1889-1

Drive Roll Outer 5/64-1/8 in (2.0-3.1 mm) Twinarc®
Tiny Twinarc Wire Straightener

Tiny Twinarc® Wire Straightener

K281

Tiny Twinarc® Wire Straightener
Horizontal Fillet and Lap Adapter Kit

Horizontal Fillet and Lap Adapter Kit

K232

Horizontal Fillet and Lap Adapter Kit for LT-7 Tractor
Butt Seam Guide Kit

Butt Seam Guide Kit

K230

Butt Seam Guide Kit accessor for the LT-7 tractor. Keeps the wire tracking in a butt joint.
Start or Crater Module for NA-5

Start or Crater Module for NA-5 Control

K334

Start or Crater Module for NA-5 controller
Automatic Flux Hopper Assembly

Flux Hopper

K219

Flux Hopper for automatic submerged arc applications
Weld Timer Module

Weld Timer Module

K337-10

Weld Timer Module for NA-5 Controller
Paralleling Kit

Paralleling Kit for DC-600 Codes Above 10500

K1611-1

Paralleling Kit allows two DC-600's to be paralleled for up to 12A of welding output. Only for codes above 10500
Paralleling Kit

Paralleling Kit for DC-600 Codes Below 10500 and DC-1000’s

K1897-1

Paralleling Kit allows for two power sources to be paralleled to double the output.
Tandem Arc Wire Reels and Mountings

Tandem Arc Wire Reels and Mounting

K390

Electrode Reels and Mounting for use with TC-3 travel carriage

Input

Input
TC-3 Travel Carriage

TC-3 Self-Propelled High Capacity Travel Carriage

K325HCS

TC-3 Self-Propelled High Capacity Travel Carriage for use in automatic submerged arc applications.
Image not found

Guide Tube Assembly Incoming Twinarc®

KP2122-1

Guide Tube Assembly Incoming Twinarc®
paralleling Kit

Paralleling Kit

K1900-1

Paralleling Kit allows two DC-1500 power sources to be wired in parallel for up to 3000A of welding output.
Image not found

Remote Interface Module

K336

Remote Interface Module for use with NA-5 controller. Provides for external signals to control inch up, inch down, start, stop.
Crater Fill Board for Automatic Wire Feeders

Crater Controls P.C. Board for NA-3S, NA-4

K245

Crater Controls P.C. Board for NA-3S, NA-4
Control Box to Head Cable Extension

Control to Head Extension Cable - 26 ft (8 m)

K335-26

Control to Head Extension Cable - 26 ft (8 m) for use with NA-5S wire drive heads
Vertical Lift Adjuster

Vertical Lift Adjuster

K29

Vertical Lift Adjuster for Lincoln submerged weld heads.
Wire Reel Assembly for 50-60 lb. Coils

Wire Reel Assembly

K299

Wire Reel Assembly with 1 in spindle hub holds Lincoln 60-lb coil packages.
Start Board for Automatic Wire Feeders

Start Controls P.C. Board

K221

Start Controls P.C. Board for use with NA-3S and NA-4 submerged arc controllers.
00005671.jpg

Tandem Arc Framework Assembly

K387

Tandem Arc Framework Assembly