Diameters / Packaging
Diameters |
---|
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Feature.Products.PDP.DetailsMain.Features
- The weld metal provides optimum strength and oxidation resistance from 1500°F (815°C) up to 2100°F (1150°C)
- Used for MIG, TIG and SAW welding of nickel-chrome-cobalt-molybdenum alloys
- Q2 Lot® - Certificate showing actual wire composition available online
Feature.Products.PDP.DetailsMain.TypicalApplications
- General Fabrication
- Petrochemical
- Process Industries
Feature.Products.PDP.DetailsMain.WeldingPositions
- All
Feature.Products.PDP.DetailsMain.ShieldingGas
- 75% Ar/25% He
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.14 | ERNiCrCoMo-1 |
CWB | AWS A5.14 | ERNiCrCoMo-1 |
WIRE COMPOSITION
Classification | %Al | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %Ti |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ERNiCrCoMo-1 Requirement | 0.8 - 1.5 | 0.05 - 0.15 | 10.0 - 15.0 | 20.0 - 24.0 | 0.50 max. | 3.0 max. | 1.0 max. | 8.0 - 10.0 | Remainder | 0.03 max. | 0.015 max. | 1.0 max. | 0.60 max. |
Typical Result | 1.4 | 0.07 | 11.6 | 22.9 | 0.02 | 0.5 | 0.3 | 8.8 | 54 | 0.003 max. | 0.003 max. | 0.0 max. | 0.36 |
TYPICAL OPERATING PROCEDURES
Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
.035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 150-190 |
.045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |