Menu Close
Techalloy Stainless Stick Electrode

Diameters / Packaging

Diameters
 (3) 8 lb Easy Open Can
 (3) 10 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) EL112125634
3/32 x 12 in (2.4 x 300 mm) EL112093632
5/32 x 14 in (4.0 x 350 mm) EL112156634

Tech-rod® 112

Stick (SMAW)

CLASSIFICATIONS:
AWS A5.11 : ENiCrMo-3

A covered electrode which is used to weld nickel-chromium-molybdenum alloys

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • (3) 8 lb Easy Open Can
  • (3) 10 lb Easy Open Can

DETAILS

Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online

Feature.Products.PDP.DetailsMain.Features

  • A covered electrode which is used to weld nickel-chromium-molybdenum alloys
  • These electrodes are used in applications where the temperature ranges from cryogenic up to 1800°F (982°C)
  • Q2 Lot® - certificates showing actual deposit composition available online

Feature.Products.PDP.DetailsMain.TypicalApplications

  • General Fabricaton
  • Maintenance and Repair Welding
  • Dissimilar joints between nickel-chromium molybdenum alloys to stainless steels, carbon or low alloys steels

Feature.Products.PDP.DetailsMain.WeldingPositions

  • Polarity DC+

Feature.Products.PDP.DetailsMain.ShieldingGas

  • N/A

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.11 ENiCrMo-3

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
ENiCrMo-3 Requirement 760 (110) min. 30 min.
Typical Result, As-welded 790 (114) 44

DEPOSIT COMPOSITION

Classification %C %Cr %Cu %Fe %Mn %Mo %P %S %Si %Nb+Ta %Ni+Co
ENiCrMo-3 Requirement 0.10 max. 20.0 - 23.0 0.50 max. 7.0 max. 1.0 max. 8.0 - 10.0 0.03 max. 0.02 max. 0.75 max. 3.15 - 4.15 55.0 min.
Typical Result 0.04 22.7 0.00 1.4 0.5 8.5 0.01 0.00 0.33 3.55 62.5

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
3/32" (2.4 mm) 65-85
1/8" (3.2 mm) 80-110
5/32" (4.0 mm) 110-140
3/16" (4.8 mm) 110-160