Diameters / Packaging
|
Diameters |
(3) 8 lb Easy Open Can |
10#CAN/30#CTN |
|---|---|---|
| 1/8 in | EL122125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | EL122093632 |
DETAILS
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Feature.Products.PDP.DetailsMain.Features
- Excellent corrosion resistance in oxidizing as well as reducing media in a wide variety of chemical process environments
- Offers an outstanding resistance to stress corrosion cracking, pitting and crevice corrosion
- Better corrosion resistance than 276 and 625
Feature.Products.PDP.DetailsMain.TypicalApplications
- General Fabrication
- Heavy Fabrication
- Dissimilar Metals
Feature.Products.PDP.DetailsMain.WeldingPositions
- Polarity DC+
Feature.Products.PDP.DetailsMain.ShieldingGas
- N/A
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrMo-10 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrMo-10 Requirement | 690 (100) min. | 25 min. |
| Typical Result, As-welded | 740 (107) | 43 |
DEPOSIT COMPOSITION
| Classification | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrMo-10 Requirement | 0.02 max. | 2.5 max. | 20.0 - 22.5 | 0.50 max. | 2.0 - 6.0 | 1.0 max. | 12.5 - 14.5 | Remainder | 0.03 max. | 0.015 max. | 0.2 max. | 0.35 max. | 2.5 - 3.5 |
| Typical Result | 0.02 | 0.0 | 21.0 | 0.00 | 4.8 | 0.4 | 13.6 | 56.5 | 0.01 | 0.004 | 0.1 | 0.00 | 3.5 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 100-140 |