Menu Close
Excalibur Stick Electrode

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 22.7 KG CAN
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032565 ED010278
3/32 x 12 in (2.4 x 300 mm) ED032564 ED010283
5/32 x 14 in (4.0 x 350 mm) ED010285

Fleetweld® 5P+®

Stick (SMAW)

CLASSIFICATIONS:
AWS : E6010
ABS : E6010

Mild Steel, Cellulosic • AWS E6010

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • (3) 10 lb Easy Open Can
  • 22.7 KG CAN
  • 50 lb Easy Open Can

DETAILS

Features

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Typical Applications

  • Cross country and in-plant pipe welding
  • Steel with moderate surface contaminants
  • Square edge butt welds
  • Welding on galvanized and specially coated steels

Welding Positions

  • All positions

Shielding Gas

  • Not Applicable

Service Information

Documentation

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010283
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010285
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"

Fleetweld® 5P+

ED032564
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"

Fleetweld® 5P+

ED032565
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ISO ISO 2560-A E 42 3 C 2 5
ABS AWS A5.1 E6010
CWB CSA W48 E4310
DNV-GL DNV - 2.9 3

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-480 (62-69) 530-580 (76-85) 23-31 51-122 (38-90) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.12-0.16 0.06 max. 0.50-0.67 0.02 0.07 max. 0.007-0.012 0.004-0.011 0.14-0.25 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 50-85
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 75-135
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 100-175
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.