Diameters / Packaging
|
Diameters |
|---|
DETAILS
ULTRACORE® stainless flux-cored wires deliver consistent mechanical properties, superior arc performance, easy slag removal
Feature.Products.PDP.DetailsMain.Features
- Precision layer wound spool delivers steady spool payoff and more consistent feeding
- Smooth arc action with minimal spatter reduces post-weld cleaning
- Polished weld bead appearance reduces post-weld brushing
Feature.Products.PDP.DetailsMain.TypicalApplications
- Suitable for Ti or Nb stabilized and nitrogen-bearing versions of the above alloys
- Applications requiring good resistance to pitting and general corrosion
- Best choice for food-grade stainless containers and surfaces; higher Ni & Mo provide better corrosion resistance to chlorides (i.e. salt) and acids (i.e. tomato or lemon juice).
- Chemical Processing
Feature.Products.PDP.DetailsMain.WeldingPositions
- All
Feature.Products.PDP.DetailsMain.ShieldingGas
- 75% Ar/25% CO2
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.22 | E316LT1-1, E316LT1-4 |
| ABS | AWS A5.22 | E316LT1-1, E316LT1-4 |
| CWB | AWS A5.22 | E316LT1-1, E316LT1-4 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas |
Tensile Strength
MPa (ksi) |
Elongation
% |
Longitudinal Face Bend |
|---|---|---|---|---|
| E316LT1-1 Requirement | 100% CO2 | 480 (70) min. | 30 min. | No opening in excess of 1/8 inch |
| E316LT1-4 Requirement | 75-80% Ar, balance CO2 | 480 (70) min. | 30 min. | No opening in excess of 1/8 inch |
| Typical Result, As-welded | 100% CO2 | 560 (81) | 46 | Passed |
| Typical Result, As-welded | 75% Ar, 25% CO2 | 560 (81) | 45 | Passed |
DEPOSIT COMPOSITION
| Classification | Shielding Gas | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si | Ferrite Number (per AWS A4.2) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E316LT1-1 Requirement | 100% CO2 | 0.04 max. | 17.0 - 20.0 | 0.75 max. | 0.5 - 2.5 | 2.0 - 3.0 | Info. Only | 11.0 - 14.0 | 0.04 max. | 0.03 max. | 1.0 max. | Info. Only |
| E316LT1-4 Requirement | 75-80% Ar, balance CO2 | 0.04 max. | 17.0 - 20.0 | 0.75 max. | 0.5 - 2.5 | 2.0 - 3.0 | Info. Only | 11.0 - 14.0 | 0.04 max. | 0.03 max. | 1.0 max. | Info. Only |
| Typical Result | 100% CO2 | 0.03 | 18.0 | 0.07 | 1.2 | 2.7 | 0.02 | 12.3 | 0.02 | 0.01 | 0.6 | 8 |
| Typical Result | 75% Ar, 25% CO2 | 0.03 | 18.1 | 0.07 | 1.3 | 2.7 | 0.01 | 12.5 | 0.02 | 0.01 | 0.7 | 8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
CTWD
mm (in.)⁽¹⁾ |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|---|
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 5.1 (200) | 22-24 | 130 | 230 (4.5) | 1.5 (3.3) | 73.3 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 8.4 (330) | 24-26 | 180 | 3.3 (7.3) | 2.6 (5.8) | 79.4 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 11.2 (440) | 26-28 | 220 | 4.4 (9.7) | 3.6 (7.9) | 81.4 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 25 (1) | 3.6 (140) | 24-26 | 170 | 2.6 (5.7) | 2.2 (4.8) | 84.2 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 25 (1) | 5.0 (195) | 24-26 | 200 | 3.6 (7.9) | 3.0 (6.7) | 84.8 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 25 (1) | 7.1 (280) | 25-27 | 220 | 5.2 (11.4) | 4.4 (9.7) | 85 |
NOTES
| Note |
|---|
| ⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD. |