Diameters / Packaging
|
Diameters |
Can 22,7 kg |
|---|---|
| 5/32 x 14 in (4.0 x 350 mm) | ED012849 |
DETAILS
Recommend to switch to Pipeliner® Arc 80 for superior puddle control and visibility
Features
- Light slag for minimal arc interference
- Deep penetration
- Clean, visible weld puddle
- Superior puddle control
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| ISO | ISO 2560-A | E 46 4 1NiMo C 2 5 |
| ABS | AWS A5.5 | E8010-G |
| CWB | CSA W48 | E5510-G |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-G Requirement | 460 (67) min. | 550 (80) min. | 19 min. | |||
| Typical Result, As-welded | 470-570 (68-83) | 570-660 (83-96) | 20-26 | 57-89 (42-66) | 32-68 (24-50) | 87-95 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Nb | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E8010-G Requirement | 0.30 min. * | 1.00 min. * | 0.20 min. * | 0.50 min. * | 0.03 max. | 0.03 max. | 0.80 min. * | 0.10 min. * | |||
| Typical Result | 0.13-0.17 | 0.13 max. | 0.06 max. | 0.55-0.95 | 0.10-0.42 | 0.010 max. | 0.63-0.81 | 0.01-0.02 | 0.01 max. | 0.06-0.16 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-185 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |
NOTES
| Note |
|---|
| * To meet the requirements of a "G" classification, the chemical composition of the weld deposit must meet the minimum requirement for one or more of these elements. |