Diameters / Packaging
Diameters |
---|
DETAILS
SuperGlaze 5087 is used where higher tensile strength is required in base metals with up to 5% Mg
Features
- Designed to meet the tensile strength requirements of high magnesium alloys
- For base metals with a max. of 5% Mg
- The presence of Zirconium produces a fine-grained weld metal structure
- Reduced tendency of solidification cracking in highly restrained welds
Typical Applications
- Marine
- Cryogenic Applications
- Shipbuilding
- Automotive
- Railway Industry
Welding Positions
- All except vertical down
Shielding Gas
- I1 : Inert gas Ar (100%), I3 : Inert gas Ar+ 0.5-95% He, Flow rate : 14.2-23.6 l/min
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.10 | ER5087 |
WIRE COMPOSITION
Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn | %Zr |
---|---|---|---|---|---|---|---|---|---|---|
ER5087 Requirement | 0.0003 max. | 0.05 - 0.25 | 0.05 max. | 0.40 max. | 4.5 - 5.2 | 0.7 - 1.1 | 0.25 max. | 0.15 max. | 0.25 max. | 0.10 - 0.20 |
Typical Result | 0.0002 max. | 0.07 | 0.00 | 0.13 | 4.9 | 0.7 | 0.06 | 0.01 | 0.00 | 0.12 |
TYPICAL OPERATING PROCEDURES
Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|---|---|---|
0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 21.6 | 185 |
1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.0 | 210 |
1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 24.8 | 280 |
2.4 mm (3/32") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 8.0 (315) | 28.0 | 500 |
3.2 mm (1/8") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 5.1 (200) | 30.3 | 535 |