DETALII
Ideal pentru încărcarea oțelurilor carbon nealiate și slab aliate. Aplicatii: incarcarea sau sudarea suprafetelor supuse uzurii metal pe metal si similare. Rezistență mare la solicitari sub sarcini grele. Cordoanele sudate sunt în general fără fisuri, prelucrabile mecanic și pot fi tăiate cu flacără. Grosimea stratului depus este nelimitată. Aplicatii: incarcarea sau sudarea suprafetelor supuse uzurii metal pe metal si similare.
Caracteristici
- Depunerile pe materiale baza din otel carbon si slab aliate
- Straturi nelimitate
- Ofera depuneri greu prelucrabile pentru depuneri sau acoperirile finale destinate uzurii metal pe metal
- Unlimited layers with proper preheat and interpass temperatures and procedures
- Unlimited layers with proper preheat and interpass temperatures and procedures
Informații despre service
Documentație
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS
Consultare rezultat test declinare a responsabilității
MECHANICAL PROPERTIES
| Classification | Number of layer | Hardness Rockwell C |
|---|---|---|
| Typical Result | 1 Layer | 14-30 |
| Typical Result | 2 Layers | 26-32 |
| Typical Result | 3 Layers | 25-34 |
| Typical Result, Work-hardened | 1 Layer | 28-34 |
| Typical Result, Work-hardened | 2 Layers | 32-36 |
| Typical Result, Work-hardened | 3 Layers | 35-38 |
| Typical Result, Flame-hardened | 2 Layers | 38-42 |
DEPOSIT COMPOSITION
| Classification | Product Size | %Al | %C | %Cr | %Mn | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|
| Typical Result | .045" (1.1 mm) | 1.6-1.9 | 0.11-0.18 | 1.2-1.4 | 1.8-2.1 | 0.004-0.012 | 0.002-0.005 | 0.50-0.75 |
| Typical Result | 1/16" (1.6 mm) | 1.6-1.9 | 0.11-0.18 | 1.2-1.4 | 1.8-2.1 | 0.004-0.012 | 0.002-0.005 | 0.50-0.75 |
| Typical Result | 5/64" (2.0 mm) | 1.4-1.7 | 0.13-0.15 | 1.1-1.4 | 2.1-2.3 | 0.004-0.008 | 0.002-0.005 | 0.45-0.60 |
| Typical Result | 7/64" (2.8 mm) | 1.4-1.7 | 0.13-0.15 | 1.1-1.4 | 2.1-2.3 | 0.004-0.008 | 0.002-0.005 | 0.45-0.60 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|
| 0.045 in (1.1 mm) | DC+ | 45 (1 3/4) | 5.1 (200) | 25 | 80 | 1.5 (3.3) |
| 0.045 in (1.1 mm) | DC+ | 45 (1 3/4) | 8.9 (350) | 28 | 130 | 2.7 (6.0) |
| 0.045 in (1.1 mm) | DC+ | 45 (1 3/4) | 12.7 (500) | 31 | 150 | 3.9 (8.7) |
| 1/16 in (1.6 mm) | DC+ | 45 (1 3/4) | 3.8 (150) | 26 | 125 | 2.1 (4.6) |
| 1/16 in (1.6 mm) | DC+ | 45 (1 3/4) | 6.4 (250) | 29 | 180 | 3.5 (7.8) |
| 1/16 in (1.6 mm) | DC+ | 45 (1 3/4) | 8.9 (350) | 32 | 225 | 5.0 (11.1) |
| 5/64 in (2.0 mm) | DC+ | 50 (2) | 3.2 (125) | 23 | 200 | 3.1 (6.9) |
| 5/64 in (2.0 mm) | DC+ | 50 (2) | 5.1 (200) | 27 | 290 | 4.9 (10.8) |
| 5/64 in (2.0 mm) | DC+ | 50 (2) | 6.4 (250) | 29 | 325 | 6.1 (21.1) |
| 7/64 in (2.8 mm) | DC+ | 64 (2 1/2) | 3.4 (135) | 26 | 360 | 5.7 (12.6) |
| 7/64 in (2.8 mm) | DC+ | 64 (2 1/2) | 4.4 (175) | 28 | 420 | 7.3 (16.0) |
| 7/64 in (2.8 mm) | DC+ | 64 (2 1/2) | 6.0 (235) | 30 | 470 | 9.6 (21.1) |