Stick Electrode 50 lb. Box

Diametre / Ambalaj

Diametre
40lb master pack (10lb Cartons)
1/8 in ED021980
5/32 in ED021982

Wearshield® 15CrMn

Stick (SMAW)

Austenitic manganese alloys, producing tough, high-strength deposits that will workharden under impact. Used in applications with high impact and low abrasion like striking or pounding.

DETALII

Austenitic manganese alloys, producing tough, high-strength deposits that will workharden under impact. Primarily used for joining, repairing or building up manganese steel parts that need to be joined together or joining manganese to carbon steel, including railroad frogs, impact hammers, rotors and rock crusher rolls. Deposits thickness is unlimited and can be flame cut. Used in applications with high impact and low abrasion.

Caracteristici

  • Provides a premium austenitic chromium manganese deposit
  • Resists severe impact or gouging even in a single layer over carbon steel
  • Used to join Hadfield manganese steel to itself or to carbon steel
  • Excellent for build-up on carbon steel prior to chromium carbide hardfacing deposit with an electrode such as Wearshield® 60
  • Unlimited layers

Aplicații tipice

  • Crusher hammers
  • Rebuilding and joining of austenitic
  • Manganese plates and parts
  • Earth moving equipment

Poziții de sudare

  • All except vertical down

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Informații despre service

S-ar putea să aveți nevoie și de

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS

Consultare rezultat test declinare a responsabilității

MECHANICAL PROPERTIES

Classification Number of layer Hardness Rockwell C
Typical Result 1 Layer 18-24
Typical Result, Work-hardened 1 Layer 40-50

DEPOSIT COMPOSITION

Classification Base Metal %C %Cr %Mn %Si
Typical Result Mild Steel 0.4 15.0 14.0 0.6

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
1/8" (3.2 mm) AC 140-160
1/8" (3.2 mm) DC+ 140-160
5/32" (4.0 mm) AC 190-210
5/32" (4.0 mm) DC+ 190-210
3/16" (4.8 mm) AC 220-250
3/16" (4.8 mm) DC+ 220-250

NOTES

Note
Can be single or multiple layers for the hardness range reported
Apply in two or more layers