You can view the site in Turkish or English language. Visit Website

Menü Kapat
10 Pound Cans of Stick Electrode

Çaplar / Paketleme

Çaplar
 Can 4,5 kg
 Can 22,7 kg
1/8 x 14 in (3.2 x 350 mm) ED033836 ED030917
3/32 x 14 in (2.5 x 350 mm) ED033835 ED030916
5/32 x 18 in (4.0 x 450 mm) ED030918

Pipeliner® 16P

Örtülü Elektrot (SMAW)

AWS:
E7016-H4
E7016-1 H4

Alaşımsız çelik, Düşük Hidrojen • AWS E7016-1 H4

Çap

Çap Seçin

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 14 in (2.5 x 350 mm)
  • 5/32 x 18 in (4.0 x 450 mm)

Paket

Paket Seç

  • Can 4,5 kg
  • Can 22,7 kg

DETAYLAR

X100 kalite boruya kadar kök paso kaynağı için tasarlanmıştır

Özellikleri

  • DC- (DCEN), boru üzerinde kök paso kaynağı için önerilen polaritedir.

Tipik Uygulamalar

  • Kök paso kaynağı
  • X60 kaliteye kadar sıcak, dolgu ve kep pasolu kaynak
  • Düşük hidrojen, X60 kalite boruda dikey yukarı kaynaklanabilme özelliği

Kaynaklama Konumları

  • All position, except vertical down

Koruyucu gaz

  • Not Applicable

Özel Özellikler

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Servis Bilgileri

Ayrıca İhtiyacınız Olabilir

50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 16P

ED030917
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 16P Stick Electrode (SMAW)

ED030918
K875 Accessory Kit

Accessory Kit - 150 Amp

K875
50 lb Can of Lincoln Electric Stick Electrodes

PIPELINER® 16P

ED030916

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7016-1 H4, E7016-H4
ABS AWS A5.1 E7016-H4
CWB AWS A5.1 E4916-H4

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F)
E7016-1 H4 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 420-550 (61-79) 510-640 (74-93) 25-41 27-186 (20-137) 29-168 (22-124)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7016-1 H4 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.6 max.
Typical Result 0.04-0.08 0.02-0.05 1.03-1.47 0.02 max. 0.01-0.04 0.008-0.014 0.003-0.012 0.32-0.57 0.02 max. 1.09-1.48 1-4 0.3 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
2.5 mm (3/32 in) DC± 55-105
2.5 mm (3/32 in) AC 60-115
3.2 mm (1/8 in) DC± 75-135
3.2 mm (1/8 in) AC 80-150
4.0 mm (5/32 in) DC± 120-170
4.0 mm (5/32 in) AC 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
DC- for root pass on pipe; DC± for general welding