Menu Close
Special Alloys Stick Electrodes Packaging

Diameters / Packaging

Diameters
 CAN 12.6 KG (3 x 4.2 KG, approx. 360 pcs)
 CAN 12.6 KG (3 x 4.2 KG, approx. 585 pcs)
 CAN 15.6 KG (3 x 5.2 KG, approx. 150 pcs)
 CAN 16.5 KG (3 x 5.5 KG, approx. 243 pcs)
2.5x350 mm CH9MVN-25-1
3.2x350 mm CH9MVN-32-1
4.0x450 mm CH9MVN-40-1
5.0x450 mm CH9MVN-50-1

CHROMET® 9 MV-N

Stick (SMAW) | CH9MVN-25-1

CLASSIFICATIONS:
E9015-B9 H4

Stick electrode CHROMET® 9 MV-N - 2.5x350 mm - CAN 12.6 KG (approx. 585 pcs)

Diameter

Select Diameter

  • 2.5x350 mm
  • 3.2x350 mm
  • 4.0x450 mm
  • 5.0x450 mm

Package

Select Package

  • CAN 12.6 KG (3 x 4.2 KG, approx. 585 pcs)

DETAILS

Designed for corrosion resistance in elevated temperatures up to 600⁰C (1112⁰F)

Features

  • Moisture resistant coating provides low amounts of weld metal hydrogen levels for a superior weld
  • Smooth arc performance in all positions

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E9015-B91 H4
ISO ISO 3580-A E CrMo91 B 3 2 H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E9015-B91 H4 Requirement 530 (77) min. 620 (90) min. 17 min.
E CrMo91 B 3 2 H5 Requirement 415 (60) min. 585 (85) min. 17 min.
Typical Result, Stress relieved 640 (93) 770 (112) 22

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %N %Nb %Ni %P %S %Si %Total Cu %V %Mn+Ni
E9015-B91 H4 Requirement 0.08 - 0.13 8.0 - 10.5 1.20 max. 0.85 - 1.20 0.02 - 0.07 0.02 - 0.10 0.80 max. 0.01 max. 0.01 max. 0.30 max. 0.25 max. 0.15 - 0.30 1.40 max.
E CrMo91 B 3 2 H5 Requirement 0.06 - 0.12 8.0 - 10.5 0.40 - 1.50 0.80 - 1.20 0.02 - 0.07 0.03 - 0.10 0.40 - 1.00 0.025 max. 0.025 max. 0.60 max. 0.3 max. 0.15 - 0.30
Typical Result 0.10 9.0 0.60 1.00 0.05 0.05 0.70 0.010 0.008 0.25 0.05 0.20 1.30

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
2.5 mm (3/32") 70-110
3.2 mm (1/8") 80-140
4.0 mm (5/32") 100-180
5.0 mm 140-240