Submerged Arc Wire

Diameters / Packaging

Diameters
60 lb Coil
1/8 in (3.2 mm) ED011051
3/32 in (2.4 mm) ED011052
5/32 in (4.0 mm) ED011053

Lincolnweld® LA-71

Submerged Arc Welding (SAW) | ED011053

CLASSIFICATIONS:
EM14K

Mild Steel Solid Electrode

DETAILS

  • A low carbon, medium manganese, medium silicon electrode containing approximately 0.1% titanium
  • Small addition of titanium allows deposits to be stress-relieved with little loss of strength, even with extended stress relief times
  • Widely used with neutral basic fluxes in both as-welded and post-weld heat treated conditions

Features

  • A low carbon, medium manganese, medium silicon electrode containing approximately 0.1% titanium
  • Small addition of titanium allows deposits to be stress-relieved with little loss of strength, even with extended stress relief times
  • Widely used with neutral basic fluxes in both as-welded and post-weld heat treated conditions
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Service Information

Documentation

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.17 EM14K
AWS AWS A5.23 EM14K
ISO ISO 14171-B SU24

WIRE COMPOSITION

Classification %C %Mn %P %S %Si %Ti %Total Cu
EM14K Requirement 0.06 - 0.19 0.90 - 1.40 0.025 max. 0.025 max. 0.35 - 0.75 0.03 - 0.17 0.35 max.
SU24 Requirement 0.06 - 0.19 0.90 - 1.40 0.025 max. 0.025 max. 0.35 - 0.75 0.03 - 0.17 0.40 max.
Typical Result 0.12 1.26 0.008 0.007 0.55 0.14 0.08