Menu Close
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Diameters / Packaging

Diameters

Excalibur® 309/309L-17

Stick (SMAW) | ED033101

CLASSIFICATIONS:
E309-17
E309L-17

Designed for joining stainless steel to mind or low alloy steel

This product could be discontinued. Please contact Customer Service.

DETAILS

Excalibur® stainless stick electrodes deliver exceptional puddle control, a smooth arc, and excellent slag release

Features

  • Q2 Lot® - certificate showing actual deposit chemistry and calculated ferrite number (FN) available online
  • Designed for joining stainless steel to mild or low alloy steel
  • Flux coating provides smooth arc transfer and slag is self-peeling for easy removal
  • Flux coating provides for smooth arc transfer in the flat and horizontal positions

Service Information

You May Also Need

Excalibur 7018 MR 14 stick electrode"

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED032589

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E309-17, E309L-17
ABS AWS A5.4 E309-17, E309L-17
CWB CSA W48 E309-17, E309L-17

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E309-17 Requirement 550 (80) min. 30 min.
E309L-17 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 460-480 (67-69) 600-610 (86-88) 34-41

DEPOSIT COMPOSITION

Classification %Bi %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309-17 Requirement 0.15 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
E309L-17 Requirement 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
Typical Result 0.001-0.002 0.02-0.03 23.7-24.5 0.06-0.13 0.9-1.0 0.04-0.33 0.08-0.12 12.6-13.1 0.02-0.03 0.01 0.82-0.96 8-15

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) AC 40-80
1/8 in (3.2 mm) DC+ 75-110
1/8 in (3.2 mm) AC 75-110
5/32 in (4.0 mm) DC+ 95-150
5/32 in (4.0 mm) AC 95-150
3/16 in (4.8 mm) DC+ 130-200
3/16 in (4.8 mm) AC 130-200

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.