Diameters / Packaging
Diameters |
---|
DETAILS
Excalibur® stainless stick electrodes deliver exceptional puddle control, a smooth arc, and excellent slag release
Features
- The weld metal is fully austenitic
- Minimal heat input welding procedures should be used to avoid solidification cracking
- These materials are used in fabrication of equipment and vessels for handling and storage of sulfuric acid and phosphoric acid
Typical Applications
- Offshore
- Power Generation
- Process Industries
Welding Positions
- All except vertical down
Shielding Gas
- N/A
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.4 | E385-16 |
MECHANICAL PROPERTIES
Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
---|---|---|
E385-16 Requirement | 520 (75) min. | 30 min. |
Typical Result, As-welded | 570-590 (83-86) | 40-41 |
DEPOSIT COMPOSITION
Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
---|---|---|---|---|---|---|---|---|---|
E385-16 Requirement | 0.03 max. | 19.5 - 21.5 | 1.2 - 2.0 | 1.0 - 2.5 | 4.2 - 5.2 | 24.0 - 26.0 | 0.03 max. | 0.02 max. | 0.90 max. |
Typical Result | 0.03 | 20.2 | 1.9 | 1.3 | 4.9 | 25.2 | 0.03 | 0.00 | 0.31 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity⁽¹⁾ |
Current
Amps |
---|---|---|
3/32 in (2.4 mm) | DC+ | 40-80 |
3/32 in (2.4 mm) | AC | 40-80 |
1/8 in (3.2 mm) | DC+ | 75-110 |
1/8 in (3.2 mm) | AC | 75-110 |
5/32 in (4.0 mm) | DC+ | 95-150 |
5/32 in (4.0 mm) | AC | 95-150 |
3/16 in (4.8 mm) | DC+ | 130-200 |
3/16 in (4.8 mm) | AC | 130-200 |
NOTES
Note |
---|
⁽¹⁾ Preferred polarity is listed first. |