Diameters / Packaging
|
Diameters |
|---|
DETAILS
Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear.
Features
- Metal-cored wire which produces a high carbon, 420 stainless steel deposit
- Use where a higher hardness is required
- Can be used on work rolls and backup rolls when water spray causes pitting on tool steel deposits
Typical Applications
- Crane, Drive, Extrusion
- Kiln, Mine Car, Power Generation
- Rail, Roll, Shovel
- Tractor, Wheel
Welding Positions
- Flat/Horizontal
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Flux | Classification | Hardness Rockwell C |
|---|---|---|
| Lincolnweld® 801® | Typical Result | 48-54 |
DEPOSIT COMPOSITION
| Flux | Classification | %C | %Cr | %Mn | %Si |
|---|---|---|---|---|---|
| Lincolnweld® 801® | Typical Result | 0.23 | 13.0 | 1.2 | 0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 1.7 (65) | 24 | 250 |
| 3/32 in (2.4 mm) | DC+ | 2.5 (100) | 28 | 525 |
| 3/32 in (2.4 mm) | DC+ | 4.4 (175) | 31 | 450 |
| 1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 360 |
| 1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 525 |
| 1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 635 |
| 5/32 in (4.0 mm) | DC+ | 1.4 (55) | 27 | 450 |
| 5/32 in (4.0 mm) | DC+ | 2.2 (85) | 30 | 650 |
| 5/32 in (4.0 mm) | DC+ | 2.9 (115) | 32 | 775 |