Diameters / Packaging
|
Diameters |
|---|
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Features
- Welds produced are generally more machinable than a Tech-Rod® 55 deposit
- A preheat and inter-pass temperature of not less than 350°F (175°C) is required during welding on cast iron to minimize the potential for cracks
- Q2 Lot® - Certificate showing actual wire composition available online
Typical Applications
- Used for welding of cast irons to other cast irons as well as for joining cast irons to mild steels and stainless steels
- Readily used for the repair of castings
- Maintenance and Repair
Welding Positions
- All
Shielding Gas
- 100% Argon
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.15 | ERNi-CI |
WIRE COMPOSITION
| Classification | %C | %Cu | %Fe | %Mn | %S | %Si | %Ni+Co |
|---|---|---|---|---|---|---|---|
| ERNi-CI Requirement | 1.0 max. | 4.0 max. | 4.0 max. | 2.5 max. | 0.03 max. | 0.75 max. | 90 min. |
| Typical Result | 0.0 max. | 0.01 max. | 0.1 | 0.01 max. | 0.003 max. | 0.15 | 100 |