Image not found

Diámetros / Embalaje

Diámetros
mm
25 lb (11.3 kg) Plastic Spool
33 lb (15 kg) Plastic Spool
500 lb (227 kg) Accu-Trak® Drum
0.030 in (0.8 mm) ED023963
0.035 in (0.9 mm) ED037302 ED029772
0.045 in (1.1 mm) ED029773
1/16 in (1.6 mm) ED019300

Blue Max® 316LSi MIG (GMAW) Wire

Soldadura de Arco Metálico con Gas (GMAW) | ED037302

CLASIFICACIONES:
ER316Si
ER316LSi

BLUE MAX® MIG 316LSI is designed to be similar to 316L but with a higher silicon content for optimum ease and speed in MIG welding

Detalles

BLUE MAX® MIG 316LSI has a high silicon level for increased puddle fluidity and toe wetting. Controlled ferrite content allows for maximum corrosion resistance.

Características

  • Q2 Lot® - Certified Material Test Report showing actual wire composition, Country of Origin and calculated ferrite number (FN) of each lot is available online in the Certificate Center
  • Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
  • High silicon level for increased puddle fluidity and toe wetting
  • Molybdenum grade for increased corrosion resistance
  • Controlled ferrite content for maximum corrosion resistance
  • Similar to 316L, with higher silicon content for optimum ease and speed in MIG welding and smooth bead appearance

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316LSi, ER316Si
ABS AWS A5.9 ER316LSi, ER316Si

MECHANICAL PROPERTIES

Classification Shielding Gas Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -60°C (-76°F)
Typical Result 98% Ar, 2% O2 440 (64) 610 (89) 37 87 (64)

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si %Ti Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316LSi Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 11.0 - 14.0 0.03 max. 0.03 max. 0.65 - 1.00
ER316Si Requirement 0.08 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 11.0 - 14.0 0.03 max. 0.03 max. 0.65 - 1.00
Typical Result 0.01 18.3-18.5 0.06 1.7-2.2 2.3-2.4 0.05-0.07 0.02 max. 11.3-11.7 0.02 0.01 0.79-0.87 0.00 max. 9 6

TYPICAL OPERATING PROCEDURES

Diameter Transfer Mode Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Deposition Rate
kg/hr (lb/hr)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.0 (120) 19-20 55 0.9 (2.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 4.6 (180) 19-20 85 1.4 (3.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 5.8 (230) 20-21 105 1.8 (3.9)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 7.6 (300) 20-21 125 2.3 (5.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 8.9 (350) 21-22 140 2.7 (5.9)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 10.2 (400) 22-23 160 3.1 (6.7)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 2.5 (100) 19-20 100 1.1 (2.8)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.2 (125) 19-20 120 1.5 (3.5)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.8 (150) 21 135 1.7 (4.2)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 4.4 (175) 21 140 2.0 (4.8)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 5.6 (220) 22 170 2.6 (6.1)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 6.4 (250) 22-23 175 2.9 (6.9)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 7.0 (275) 22-23 185 3.2 (7.6)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 10.2 (400) 22 180 3.1 (6.7)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 10.8 (425) 23 190 3.3 (7.1)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 11.4 (450) 23 200 3.5 (7.5)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 12.1 (475) 23 210 3.7 (8.0)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 6.1 (240) 23 195 2.8 (6.6)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 6.6 (260) 24 230 3.0 (7.2)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 7.6 (300) 24 240 3.5 (8.3)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 8.3 (325) 25 250 3.8 (9.0)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 9.1 (360) 25 260 4.2 (10.0)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 4.4 (175) 25 260 4.3 (9.2)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 5.1 (200) 26 310 4.9 (10.5)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 6.4 (250) 26 330 6.2 (13.1)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 7.0 (275) 27 360 6.8 (14.4)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 7.6 (300) 28 390 7.4 (15.8)

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/8 in (3.2 mm) from CTWD.