DETAILS
SuperGlaze® 5183 Aluminum Magnesium Manganese alloy is commonly used for higher strength welding of 5XXX and 6XXX base materials. Higher strength and superior salt water corrosion resistance with common shipbuilding base materials compared to 5356.
Feature.Products.PDP.DetailsMain.Features
- Designed for applications where higher strength is required
- For 5083 and 5456 base materials
- Excellent corrosion resistance ideal for Ship building and marine applications
Feature.Products.PDP.DetailsMain.TypicalApplications
- Marine fabrication and repair
- Cryogenic tanks
- Shipbuilding
- Bicycle frames
- Railing industry
Feature.Products.PDP.DetailsMain.WeldingPositions
- All except vertical down
Feature.Products.PDP.DetailsMain.ShieldingGas
- I1 : Inert gas Ar (100%), I3 : Inert gas Ar+ 0.5-95% He, Flow rate : 14-24 l/min (argon)
Feature.Products.PDP.DetailsMain.SpecialFeatures
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5183 |
WIRE COMPOSITION
| Classification | %Be | %Mg | %Zn | %Cr | %Cu | %Fe | %Mn | %Si | %Ti |
|---|---|---|---|---|---|---|---|---|---|
| ER5183 Requirement | 0.0003 max. | 4.3 - 5.2 | 0.25 max. | 0.05 - 0.25 | 0.10 max. | 0.40 max. | 0.50 - 1.0 | 0.40 max. | 0.15 max. |
| Typical Result | 0.0003 max. | 4.9 | 0.01 | 0.07 | 0.00 | 0.12 | 0.6 | 0.05 | 0.07 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 21.6 | 185 |
| 1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.0 | 210 |
| 1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 24.8 | 280 |
| 2.4 mm (3/32") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 8.0 (315) | 28.0 | 500 |
| 3.2 mm (1/8") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 5.1 (200) | 30.3 | 535 |