Diametre / Ambalaj
|
Diametre |
50 lb Easy Open Can |
|---|---|
| 5/32 x 14 in (4.0 x 350 mm) | ED012896 |
DETALII
Caracteristici
- For welding 0.50% molybdenum steel
- Deep penetration and superior puddle control
- Light slag for minimal arc interference
- Clean, visible weld puddle
Aplicații tipice
- API 5L X42 through X56 grade pipe
- Cross country and in-plant pipe
Poziții de sudare
- All
Gaz protector
- Not Applicable
Caracteristici speciale
- Designed for downhill welding on pipe
Informații despre service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS
Consultare rezultat test declinare a responsabilității
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-A1 |
| ISO | ISO 2560-B | E4910-G P |
| ABS | AWS A5.5 | E7010-A1 |
| CWB | CSA W48 | E4910-A1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Hardness Rockwell B |
|---|---|---|---|---|
| E7010-A1 Requirement | 390 (57) min. | 480 (70) min. | 22 min. | |
| Typical Result, 1 hour @ 620°C (1150°F) | 440-520 (64-75) | 530-630 (77-91) | 22-28 | 84-93 |
DEPOSIT COMPOSITION
| Classification | %C | %Mn | %Mo | %P | %S | %Si |
|---|---|---|---|---|---|---|
| E7010-A1 Requirement | 0.12 max. | 0.60 max. | 0.40 - 0.65 | 0.03 max. | 0.03 max. | 0.40 max. |
| Typical Result | 0.07-0.12 | 0.40-0.58 | 0.53-0.57 | 0.01 max. | 0.01 max. | 0.13-0.26 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 50-90 |
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-175 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |